St. Petersburg, Fedorovskoye settlement, Postal str., 21G
+7 (812) 670 52 36 Request a call
Ru
En
01.04.2021

Search for equipment suppliers

Search for equipment suppliers

Functional Materials is interested in receiving proposals from potential suppliers of equipment for the following units:

Dryer for solutions, suspensions and paste materials with a high degree of adhesion.

Required technical specifications of the dryer:
- Operating temperature - 120-160 degrees Celsius;
- Operating mode - continuous;
- Heating method - indirect;
- The method of heat transfer - by radiation;
- Perhaps the use of heat recuperators;
- Capacity of evaporated moisture 300 - 350 kg / h;
- Productivity of finished product is 250-300 kg/h;
- Heat source - electric heaters, natural gas;
- Automatic control and maintenance of the specified working temperature;
- Remote control from a single control panel for loading, unloading of the material, removal of wet air, and humidity control of the finished product;
- It is possible to reduce the partial pressure of the medium in the drying zone;
- Parameters of environment: located indoors, temperature from +10 to 30 degrees Celsius, humidity up to 80%.

High-temperature calcining furnace for fine powders


The required technical characteristics of the dryer:


- Operating temperature - 1250 -1600 degrees Celsius;
- Operating mode - periodic, continuous;
- Heating method - indirect;
- The method of heat transfer - by radiation;
- Application of heat recuperators is possible (heat takeoff for customer's needs or preheating of material);
- Productivity by finished product - 1000 kg/day;
- Heat source - electric heaters, natural gas;
- Automatic control and maintenance of the specified working temperature of the material;
- Remote control from a single control panel for loading, unloading of the material, removal of wet air, and temperature control of the finished product;
- It is possible to reduce the partial pressure of the medium in the drying zone;
- Parameters of the environment: located indoors, temperature from +10 to 30 degrees Celsius, humidity up to 80%.

If your company knows how to make any of the required units, please send information to e-mail: petkam70@mail.ru, phone for contact and questions: +79110851516.

Read also